how can I reset the maintenance light on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged during the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Reminder for oil change or service is displayed
•No other warning lights are present

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the 'Trip' or 'Select/Reset' button on the dashboard.
3
Check the odometer display to confirm the current mileage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure

Parts Required

•None required for the reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Turn the ignition to the "ON" position (do not start the engine).

2. Access the Maintenance Light Reset Mode

Press the "Trip" or "Select/Reset" button until the odometer reading is displayed.
While the odometer is displayed, turn the ignition off.

3. Reset the Maintenance Light

Press and hold the "Trip" or "Select/Reset" button.
Turn the ignition back to the "ON" position while still holding the button.
Continue to hold the button until the maintenance light flashes and turns off (usually takes about 10 seconds).
Release the button.

4. Confirm Reset

Turn the ignition off and then back on again to check that the maintenance light is no longer illuminated.
Verify that the odometer reading is displayed and no maintenance reminders are active.