Honda Accord 10th Generation (2018-2022) ABS light is on how do I reset it

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

487 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the ABS light on your Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and solutions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before working on the braking system.
•Disconnect the battery if working on electrical components of the ABS.

Symptoms

•ABS warning light illuminated on the dashboard
•Possible decrease in braking performance
•Increased stopping distance
•Brake pedal feeling spongy or unresponsive
•No other warning lights present

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific ABS issues.
2
Inspect the ABS fuses for any blown fuses that may be causing the warning light.
3
Check the brake fluid level and condition, ensuring it is within the recommended range.
4
Examine the ABS wheel speed sensors for damage or disconnection.
5
Verify the condition of the brake system components, including brake pads and rotors.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Basic hand tools (screwdrivers, socket set)

Parts Required

•ABS sensor (if faulty)
•Brake fluid (if low)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific ABS issues.
2
Inspect the ABS fuses for any blown fuses that may be causing the warning light.
3
Check the brake fluid level and condition, ensuring it is within the recommended range.
4
Examine the ABS wheel speed sensors for damage or disconnection.
5
Verify the condition of the brake system components, including brake pads and rotors.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off, and the ignition is in the "off" position.

2. Scan for Error Codes

Connect the OBD-II scanner to the vehicle’s diagnostic port.
Turn the ignition to the "on" position without starting the engine.
Follow the scanner’s prompts to read and record any ABS-related error codes.
Clear the error codes using the scanner, if applicable.

3. Inspect ABS Components

If error codes are present, address the issues indicated (e.g., replace faulty sensors, repair wiring).
Inspect the ABS fuses in the fuse box. Refer to the owner’s manual for fuse locations.
Replace any blown fuses with the appropriate amperage.

4. Check Brake Fluid

Open the hood and locate the brake fluid reservoir.
Ensure the brake fluid is at the correct level; top off with the manufacturer-recommended fluid if necessary.
Close the reservoir cap securely.

5. Resetting the ABS System

Turn the ignition key to the "on" position without starting the engine.
Press the brake pedal several times to allow the ABS system to recalibrate.
Start the engine and check if the ABS light remains off after a short drive.