why is my Honda Accord 9th Generation (2013-2017) steering wheel shaking

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

469 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix steering wheel shaking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses when working with tires and lifting equipment.
•Ensure the vehicle is securely lifted before working underneath.

Symptoms

•Steering wheel vibrates while driving, especially at higher speeds
•Uneven tire wear noticed on the front tires
•Vehicle pulls to one side when driving straight
•Loud noises or thumping felt through the steering wheel
•Check tire pressure warning may illuminate

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer specifications.
2
Check for visible damage or bulges on the tires.
3
Perform a wheel balance check using a tire balancer.
4
Inspect suspension components for wear or damage (e.g., tie rods, ball joints).
5
Perform a wheel alignment check and adjust if necessary.
6
Test drive the vehicle to confirm if the shaking persists after adjustments.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Socket set
•Tire balancer
•Alignment machine

Parts Required

•Wheel weights (if needed)
•Replacement suspension parts (if any are found faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer specifications.
2
Check for visible damage or bulges on the tires.
3
Perform a wheel balance check using a tire balancer.
4
Inspect suspension components for wear or damage (e.g., tie rods, ball joints).
5
Perform a wheel alignment check and adjust if necessary.
6
Test drive the vehicle to confirm if the shaking persists after adjustments.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the car is parked on a flat surface and the parking brake is engaged.

2. Inspect and Adjust Tire Pressure

Sub-steps:
- Use a tire pressure gauge to measure the pressure in each tire.
- Refer to the driver’s side door jamb for the recommended tire pressure.
- Inflate or deflate tires as necessary to achieve correct pressure.

3. Wheel Balancing

Sub-steps:
- Remove the wheel from the vehicle using a socket set.
- Mount the wheel on a tire balancer.
- Identify any imbalances and add wheel weights as needed.
- Reinstall the wheel and torque lug nuts to manufacturer specifications (typically 80-100 ft-lbs).

4. Suspension Inspection

Sub-steps:
- Visually inspect tie rods, ball joints, and bushings for any signs of wear or damage.
- If any components are found to be faulty, replace them with OEM parts as necessary.

5. Wheel Alignment

Sub-steps:
- Use an alignment machine to measure wheel angles.
- Adjust camber, caster, and toe settings according to factory specifications.
- Test drive the vehicle to confirm the steering wheel is centered and shaking has diminished.