why is my Honda Accord 9th Generation (2013-2017) so noisy when I turn

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

611 words

Problem Statement

Learn how to diagnose and fix excessive noise during turns in Honda Accord 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported on jack stands before working underneath it.
•Disconnect the battery before performing electrical work or if the power steering system is being serviced.

Symptoms

•Loud grinding or clicking noise when turning
•Whining sound while steering
•Increased road noise during turns
•Vibration in the steering wheel
•Difficulty in steering or stiff steering response

Diagnostic Steps

1
Perform a visual inspection of the suspension components for signs of wear or damage.
2
Check the wheel bearings for play by lifting the vehicle and spinning the wheels.
3
Inspect the CV joints and boots for any signs of damage or lubrication loss.
4
Verify power steering fluid levels and check for leaks in the power steering system.
5
Test-drive the vehicle while making tight turns to replicate the noise and identify its source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Bearing puller
•CV joint removal tool
•Fluid pump or siphon
•Wheel chocks

Parts Required

•Wheel bearings (if needed)
•CV joints (if needed)
•Power steering fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Perform a visual inspection of the suspension components for signs of wear or damage.
2
Check the wheel bearings for play by lifting the vehicle and spinning the wheels.
3
Inspect the CV joints and boots for any signs of damage or lubrication loss.
4
Verify power steering fluid levels and check for leaks in the power steering system.
5
Test-drive the vehicle while making tight turns to replicate the noise and identify its source.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a flat surface, engage the parking brake, and disconnect the battery if necessary.

2. Inspect and Replace Wheel Bearings (if applicable)

Tools Required: Socket set, torque wrench, bearing puller, wheel chocks
Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Remove the wheel by loosening the lug nuts with a socket wrench.
3. Inspect the wheel bearing by spinning the wheel hub; listen for grinding noises.
4. If bearing failure is suspected, remove the brake caliper and rotor.
5. Use a bearing puller to remove the old bearing from the hub assembly.
6. Install the new bearing, ensuring it is seated properly.
7. Reassemble the rotor and caliper, and tighten all fasteners to manufacturer specifications.

3. Inspect and Replace CV Joints (if applicable)

Tools Required: Socket set, CV joint removal tool, grease
Sub-steps:
1. Remove the wheel as outlined in the previous section.
2. Disconnect the lower ball joint and remove the axle shaft from the hub.
3. Inspect the CV joint and boot for any tears or grease leakage.
4. If damaged, remove the CV joint from the axle shaft using the CV joint removal tool.
5. Install the new CV joint with fresh grease and secure it with the retaining clip.
6. Reinstall the axle shaft and reconnect the lower ball joint.

4. Inspect and Service Power Steering System (if applicable)

Tools Required: Fluid pump or siphon, power steering fluid
Sub-steps:
1. Check the power steering fluid reservoir for the correct level.
2. If low, add the appropriate power steering fluid as specified in the owner’s manual.
3. Inspect hoses and connections for leaks; replace any damaged parts.
4. Bleed the power steering system to remove air if any components were replaced.