why is my Honda Accord 9th Generation (2013-2017) making a knocking sound?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

545 words

Problem Statement

Learn how to diagnose and fix knocking sounds in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repairs.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components to prevent burns.

Symptoms

•Knocking sound coming from the engine or suspension
•Vibrations felt in the steering wheel or cabin
•Loss of power or acceleration
•Engine stalling or rough idling
•Increased engine noise during operation

Diagnostic Steps

1
Perform a visual inspection of the engine bay for loose or damaged components.
2
Start the engine and listen closely to determine the location of the knocking sound (engine compartment vs. undercarriage).
3
Use an OBD-II scanner to check for any stored error codes that may indicate engine or transmission issues.
4
Check the oil level and condition; look for signs of contamination or low levels.
5
Inspect the suspension components (shocks, struts, bushings) for wear or damage.
6
Test drive the vehicle while listening for changes in the knocking sound under different conditions (acceleration, deceleration).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Oil filter wrench

Parts Required

•Engine oil (0W-20)
•Oil filter
•Engine mounts (if needed)
•Timing chain or belt (if needed)
•Suspension bushings and struts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Perform a visual inspection of the engine bay for loose or damaged components.
2
Start the engine and listen closely to determine the location of the knocking sound (engine compartment vs. undercarriage).
3
Use an OBD-II scanner to check for any stored error codes that may indicate engine or transmission issues.
4
Check the oil level and condition; look for signs of contamination or low levels.
5
Inspect the suspension components (shocks, struts, bushings) for wear or damage.
6
Test drive the vehicle while listening for changes in the knocking sound under different conditions (acceleration, deceleration).

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Repair Engine Components

Check Engine Mounts
- Visually inspect the engine mounts for cracks or wear.
- Use a jack to support the engine slightly and replace damaged mounts if necessary.
Replace Oil and Filter
- Drain the engine oil and remove the oil filter.
- Install a new oil filter and refill with the manufacturer-recommended oil type (e.g., 0W-20).
Inspect Timing Chain or Belt
- Remove the timing cover and check for slack or damage.
- If worn, replace the timing chain or belt according to the service manual specifications.

3. Inspect and Repair Suspension Components

Check Suspension Bushings and Struts
- Remove the wheel to access the suspension components.
- Inspect bushings for cracking or excessive wear; replace as needed.
- Test struts for leakage or performance issues; replace if necessary.

4. Reassemble and Test

Reinstall any components removed during inspection.
Tighten all bolts to the manufacturer's specified torque values.
Reconnect the negative battery terminal.