why is my Honda Accord 9th Generation (2013-2017) making a grinding noise when turning

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

512 words

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before inspecting or replacing components.

Symptoms

•Grinding noise when turning the steering wheel
•Possible vibrations felt through the steering wheel
•Difficulty in steering or a stiff steering feel
•Uneven tire wear
•Fluid leaks under the vehicle, particularly power steering fluid

Diagnostic Steps

1
Inspect power steering fluid level and condition in the reservoir.
2
Check for any visible leaks in the power steering lines and hoses.
3
Examine the steering rack and pinion for signs of wear or damage.
4
Inspect the wheel bearings for play or roughness by spinning the wheel.
5
Check the CV joints and boots for damage or wear.
6
Examine suspension components, including struts and control arms for looseness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Wheel chocks
•Socket set
•Torque wrench
•Power steering fluid

Parts Required

•Power steering fluid
•Wheel bearings (if worn)
•CV joint or axle assembly (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect power steering fluid level and condition in the reservoir.
2
Check for any visible leaks in the power steering lines and hoses.
3
Examine the steering rack and pinion for signs of wear or damage.
4
Inspect the wheel bearings for play or roughness by spinning the wheel.
5
Check the CV joints and boots for damage or wear.
6
Examine suspension components, including struts and control arms for looseness.

Solution

1. Preparation

Tools Required: Jack, jack stands, wheel chocks, socket set, torque wrench, power steering fluid.
Ensure the vehicle is on a flat surface and securely raised with jack stands.
Disconnect the negative battery terminal for safety.

2. Inspect and Replace Power Steering Fluid

Sub-steps:
1. Remove the power steering fluid reservoir cap.
2. Check the fluid level; if it's low or discolored, drain the fluid using a siphon or turkey baster.
3. Refill with manufacturer-recommended power steering fluid.
4. Start the engine and turn the steering wheel from lock to lock several times to bleed air from the system.

3. Replace Worn Components

Sub-steps:
1. If wheel bearings are found to be faulty, remove the wheel and brake caliper.
2. Remove the hub assembly and replace the wheel bearings using a bearing press.
3. Inspect CV joints; if damaged, remove the axle by loosening the axle nut and pulling the axle out from the hub.
4. Replace the CV joint or complete axle as necessary.
5. Reassemble all components, ensuring all bolts are torqued to manufacturer specifications.

4. Check Suspension Components

Sub-steps:
1. Inspect struts for leaks or damage; replace if necessary.
2. Check control arm bushings for wear; replace if cracked or worn out.
3. Reassemble any components removed during inspection and ensure proper alignment.