why does my Honda Accord shake when I brake at high speeds

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord during high-speed braking. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the vehicle to cool before working on brake components.
•Ensure the vehicle is securely lifted and supported on jack stands before removing wheels.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Vehicle pulls to one side while braking
•Increased stopping distance
•Loud noise during braking (if warped rotors are present)

Diagnostic Steps

1
Inspect brake rotor thickness and surface for warping using a dial indicator.
2
Check brake pads for wear and ensure they are not unevenly worn.
3
Examine tire balance and alignment to rule out influence on braking.
4
Inspect suspension components (e.g., control arms, ball joints) for wear or damage.
5
Test brake calipers for proper function and ensure they are not sticking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Brake caliper tool
•Torque wrench
•Dial indicator (for rotor inspection)

Parts Required

•New brake rotors
•New brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotor thickness and surface for warping using a dial indicator.
2
Check brake pads for wear and ensure they are not unevenly worn.
3
Examine tire balance and alignment to rule out influence on braking.
4
Inspect suspension components (e.g., control arms, ball joints) for wear or damage.
5
Test brake calipers for proper function and ensure they are not sticking.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Remove Wheel

Using a lug wrench, loosen the lug nuts while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the wheel to access the braking components.

3. Inspect and Replace Brake Rotors (if warped)

Remove the caliper by unbolting it from its bracket (typically two bolts).
Hang the caliper using a bungee cord to avoid stressing the brake line.
Remove the rotor by unscrewing any retaining screws and pulling it off the hub.
Install new rotors, ensuring they are clean and properly aligned.
Torque rotor retaining screws to manufacturer specifications.

4. Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Inspect the caliper piston; compress it using a brake caliper tool if necessary.
Install new brake pads, ensuring they are correctly seated in the bracket.

5. Reassemble and Test

Reinstall the caliper over the new brake pads and rotor.
Tighten caliper bolts to the specified torque.
Reattach the wheel and lower the vehicle.
Torque lug nuts to the manufacturer's specifications.