why does my Honda Accord shake when I accelerate

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

443 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always use jack stands when working under the vehicle.

Symptoms

•Vibrations felt in the steering wheel
•Shaking in the seats or floorboard
•Increased noise from the engine or drivetrain
•Difficulty maintaining speed
•Possible check engine light illumination

Diagnostic Steps

1
Inspect the tire condition and balance; check for uneven wear or damage.
2
Check for loose or damaged engine and transmission mounts.
3
Perform a visual inspection of drive shafts for any signs of wear or damage.
4
Use an OBD-II scanner to check for any stored error codes.
5
Inspect the wheel alignment and suspension components for wear or misalignment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Tire balancing machine
•Jack and jack stands
•OBD-II scanner
•Torque wrench

Parts Required

•Tires (if damaged)
•Engine/transmission mounts (if worn)
•Drive shafts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tire condition and balance; check for uneven wear or damage.
2
Check for loose or damaged engine and transmission mounts.
3
Perform a visual inspection of drive shafts for any signs of wear or damage.
4
Use an OBD-II scanner to check for any stored error codes.
5
Inspect the wheel alignment and suspension components for wear or misalignment.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface, engage the parking brake, and disconnect the battery.

2. Tire Inspection and Balancing

Remove the wheels using a lug wrench.
Inspect tires for uneven wear or damage; replace if necessary.
Balance tires using a tire balancing machine to ensure even weight distribution.
Reinstall wheels and torque lug nuts to manufacturer specifications (usually 80-100 ft-lbs).

3. Check Engine and Transmission Mounts

Locate engine and transmission mounts (usually near the engine block and transmission).
Use a jack to support the engine/transmission gently.
Inspect mounts for cracks or excessive wear; replace if damaged.
Reinstall any removed components and lower the jack.

4. Inspect Drive Shafts

Elevate the vehicle using a jack and secure with jack stands.
Inspect the drive shafts for bends, cracks, or worn CV joints; replace if necessary.
Ensure all bolts are properly torqued to manufacturer specifications.

5. Wheel Alignment

Check the alignment using an alignment machine.
Adjust the alignment according to manufacturer specifications if necessary.