why does my Honda Accord make a popping noise when going over bumps

Solution

1. Preparation

• Tools Required: Jack and jack stands, socket set, pry bar, torque wrench, safety goggles, gloves
• Raise the vehicle using a jack and secure it on jack stands. Ensure the vehicle is stable before proceeding.

2. Inspect and Remove Damaged Components

• Sub-steps:
  • Begin by inspecting the struts and springs for any visible damage or leakage.
  • If damage is found, remove the strut assembly from the vehicle:
    1. Loosen the lug nuts on the wheel corresponding to the affected strut.
    2. Remove the wheel to access the suspension components.
    3. Disconnect the strut from the lower control arm by removing the bolt.
    4. Remove the top mounting bolts of the strut from the engine bay or wheel well.
    5. Carefully take out the strut assembly.

3. Replace Worn or Damaged Parts

• Sub-steps:
  • If the strut is damaged, replace it with a new unit:
    1. Install the new strut by reversing the removal process.
    2. Ensure all bolts are tightened to the manufacturer’s specifications.
    3. Replace any damaged bushings or sway bar links identified during the inspection.

4. Reassemble and Test

• Sub-steps:
  • Reinstall the wheel and hand-tighten the lug nuts.
  • Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.
  • Perform a test drive to check for the elimination of the popping noise.