why does my Honda Accord 9th Generation (2013-2017) vibrate when braking at high speeds

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

447 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibrations in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported before working underneath it.
•Use gloves and safety goggles when handling brake components and cleaning agents.

Symptoms

•Steering wheel shakes during braking
•Pulsating brake pedal feel
•Increased stopping distance
•Noise from the brakes or suspension when braking
•Uneven tire wear

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for wear and proper installation.
3
Examine wheel alignment and balance.
4
Inspect suspension components for wear or damage.
5
Test brake fluid condition and level.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Lug wrench
•Torque wrench
•Dial gauge
•Brake cleaner

Parts Required

•Replacement brake rotors
•Replacement brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.

2. Lift the Vehicle

Use a hydraulic jack to lift the vehicle.
Secure with jack stands for safety.

3. Remove Wheels

Use a lug wrench to remove the lug nuts and take off the wheels.

4. Inspect Brake Rotors

Check each rotor for signs of warping (measured using a dial gauge).
- If warped:
  1. Remove the caliper by unscrewing the caliper bracket bolts.
  2. Replace with new rotors, ensuring proper torque (typically 80-100 ft-lbs for caliper bolts).
  3. Clean the new rotors with brake cleaner to remove protective oil.

5. Check Brake Pads

Inspect the thickness of the brake pads.
- If worn:
  1. Remove the caliper and replace with new pads.
  2. Ensure the calipers slide freely and lubricate the slides if necessary.

6. Wheel Alignment and Balance

Have the wheels balanced and aligned at a professional shop to ensure proper handling and tire wear.

7. Reassemble and Lower the Vehicle

Reattach the wheels and tighten lug nuts to manufacturer specifications (usually 80-100 ft-lbs).
Lower the vehicle and remove jack stands.