why does my Honda Accord 9th Generation (2013-2017) transmission slip when shifting?

Honda Accord Eleventh Generation (2023-present)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

559 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slippage in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Noticeable engine revving without corresponding acceleration
•Delayed or harsh shifting between gears
•Transmission warning light illuminated on the dashboard
•Fluid leaks under the vehicle
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission filter for clogs or blockages.
5
Inspect the transmission control module (TCM) for faults or malfunctions.
6
Test the transmission solenoids for proper operation using a multimeter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Fluid catch pan
•Funnel

Parts Required

•Honda ATF (Automatic Transmission Fluid)
•Transmission filter
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission filter for clogs or blockages.
5
Inspect the transmission control module (TCM) for faults or malfunctions.
6
Test the transmission solenoids for proper operation using a multimeter.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Check fluid level; if low, top up with the recommended Honda ATF (Automatic Transmission Fluid).
3. If the fluid is dirty or has a burnt smell, proceed to drain and replace.
4. Remove the drain plug using a socket set and drain the old fluid into a pan.
5. Replace the drain plug and torque it to the manufacturer's specification (typically around 20 lb-ft).
6. Refill with new Honda ATF through the dipstick tube using a funnel.

3. Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by unbolting it with a socket set.
2. Clean the pan and inspect for metal shavings or debris.
3. Remove the old filter and replace it with a new one, ensuring proper alignment.
4. Reinstall the transmission pan with a new gasket, tightening bolts to the specified torque.

4. Inspect and Test Transmission Solenoids

Sub-steps:
1. Locate the transmission solenoids, typically found in the valve body.
2. Disconnect the wiring harness from the solenoids.
3. Use a multimeter to test each solenoid for resistance; replace any that are outside the specified range.
4. Reconnect the wiring harness and ensure a secure fit.

5. Reconnect Battery and Test Drive

Sub-steps:
1. Reconnect the battery terminals and ensure they are secure.
2. Start the vehicle and check for error codes again.
3. Conduct a test drive to verify that the transmission shifts smoothly without slipping.