why does my Honda Accord 9th Generation (2013-2017) transmission slip when shifting

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

569 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission.

Symptoms

•Slipping sensation when changing gears
•Delayed engagement when shifting from park to drive
•Engine RPMs increase without corresponding vehicle acceleration
•Harsh or abrupt shifting
•Transmission warning light illuminated on the dashboard

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics (OBD-II) system for any error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for leaks around seals and gaskets.
4
Test the transmission control module (TCM) for proper operation.
5
Look for any signs of wear or damage to the transmission linkage or cables.
6
Inspect the condition of the torque converter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Funnel
•Transmission fluid pump
•Socket set
•Torque wrench
•Gasket scraper

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics (OBD-II) system for any error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for leaks around seals and gaskets.
4
Test the transmission control module (TCM) for proper operation.
5
Look for any signs of wear or damage to the transmission linkage or cables.
6
Inspect the condition of the torque converter.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative battery terminal for safety.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it to check fluid level.
2. If low, add the recommended transmission fluid (Honda ATF DW-1).
3. If the fluid is dark or burnt-smelling, drain the transmission fluid.
4. Replace the old fluid with new fluid by using a transmission pump or through the drain plug.
5. Recheck fluid level after replacing and ensure it's within the optimal range.

Tools Required:

Funnel
Transmission fluid pump (if needed)

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by unscrewing the bolts (use a torque wrench for proper reinstallation).
2. Carefully take out the old filter.
3. Install the new filter, ensuring it is seated properly.
4. Clean the transmission pan and reinstall it with a new gasket.

Tools Required:

Socket set
Torque wrench
Gasket scraper

4. Reprogram Transmission Control Module (if necessary)

Sub-steps:
1. Connect the OBD-II scanner to the vehicle.
2. Follow the manufacturer's instructions to reprogram or update the TCM.
3. Clear any transmission-related fault codes.

Tools Required:

OBD-II scanner

5. Test Drive and Monitor Performance

Sub-steps:
1. Reconnect the negative battery terminal.
2. Start the engine and allow it to reach operational temperature.
3. Conduct a test drive to ensure smooth shifting and no slipping.