why does my Honda Accord 9th Generation (2013-2017) shake when I brake

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

505 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system to prevent electronic failures.
•Allow the vehicle to cool before working on brakes to avoid burns.

Symptoms

•Shaking or vibration felt in the steering wheel and/or brake pedal
•Increased noise during braking
•Potential pulling to one side while braking
•Uneven wear on brake pads or rotors
•Check engine light may illuminate in some cases

Diagnostic Steps

1
Inspect brake pads for wear and condition.
2
Check brake rotors for warping or uneven surfaces.
3
Examine brake calipers for proper operation and sticking.
4
Verify the condition of suspension components (e.g., control arms, bushings).
5
Perform a wheel balance check and alignment evaluation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Brake pad spreader

Parts Required

•Brake pads
•Brake rotors
•Brake caliper grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and components.
Park the vehicle on a level surface and engage the parking brake.
Use wheel chocks to prevent movement.

2. Remove Wheel

Use a lug wrench to loosen lug nuts, but do not fully remove them.
Raise the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

Brake Pads:
- Remove the caliper bolts using a socket set.
- Slide the caliper off the rotor and inspect the pads for thickness and uneven wear.
Brake Rotors:
- Check for warping by measuring with a dial indicator or visual inspection for grooves.
- If warped, replace the rotors.
Calipers:
- Ensure calipers move freely and do not have signs of sticking or damage.

4. Replace or Resurface Components

If brake pads are worn:
- Remove old pads and install new ones according to the manufacturer's specifications.
If rotors are warped:
- Replace rotors with new ones or have them resurfaced if within tolerance.

5. Reassemble Components

Reinstall the caliper over the new pads or resurfaced rotor.
Tighten caliper bolts to the manufacturer's torque specifications (usually around 20-25 ft-lbs).
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and tighten the lug nuts to the appropriate torque (usually 80-100 ft-lbs).