why does my Honda Accord 9th Generation (2013-2017) shake when I accelerate

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

515 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the vehicle to cool down before working on the brakes or drivetrain components.

Symptoms

•Vibrations felt through the steering wheel or the vehicle body
•Shaking intensifies with increased acceleration
•Possible noise accompanying the shaking (e.g., grinding or clunking)
•Uneven tire wear observed
•Steering wheel may pull to one side

Diagnostic Steps

1
Inspect tire condition and balance by visually checking for bulges, cracks, or uneven wear.
2
Check wheel alignment using alignment equipment to determine if the vehicle is out of specification.
3
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
4
Examine the driveshaft and CV joints for any signs of wear or looseness.
5
Scan for error codes using an OBD-II scanner to check for any related engine or transmission issues.
6
Test drive the vehicle to confirm when and how the shaking occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Tire balancer
•Wheel alignment machine
•Socket set
•Torque wrench
•OBD-II scanner

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•CV joints/driveshaft (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and balance by visually checking for bulges, cracks, or uneven wear.
2
Check wheel alignment using alignment equipment to determine if the vehicle is out of specification.
3
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
4
Examine the driveshaft and CV joints for any signs of wear or looseness.
5
Scan for error codes using an OBD-II scanner to check for any related engine or transmission issues.
6
Test drive the vehicle to confirm when and how the shaking occurs.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative battery terminal if working on electrical components.

2. Tire Inspection and Balance

Sub-steps:
- Remove the wheel covers or hubcaps if equipped.
- Loosen the lug nuts with a lug wrench.
- Raise the vehicle using a jack and secure it on jack stands.
- Remove the tires and inspect for any visible damage or uneven wear.
- Have tires balanced at a tire shop if necessary.
Tools Required: Lug wrench, jack, jack stands, and tire balancer.

3. Check Wheel Alignment

Sub-steps:
- Use alignment tools to check the camber, caster, and toe settings.
- Adjust as needed based on manufacturer specifications.
Tools Required: Wheel alignment machine.

4. Inspect Suspension Components

Sub-steps:
- Visually inspect control arms, bushings, and struts for wear or damage.
- Replace any worn or damaged parts as necessary.
Tools Required: Socket set, torque wrench, and replacement parts.

5. Examine Drivetrain Components

Sub-steps:
- Inspect the driveshaft for any signs of damage or play in the CV joints.
- Replace any components that are worn or damaged.
Tools Required: Socket set, torque wrench, and replacement parts.