why does my Honda Accord 9th Generation (2013-2017) shake when I accelerate

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

525 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any inspections on the engine or exhaust system.

Symptoms

•Shaking or vibration felt in the steering wheel
•Increased vibrations in the cabin
•Noise accompanying the shaking (e.g., clunking or grinding)
•Decreased acceleration performance
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect the tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components for wear or damage.
3
Check the engine and transmission mounts for signs of deterioration.
4
Examine the driveshaft and CV joints for any play or damage.
5
Scan for any Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
6
Test drive the vehicle to replicate the shaking and identify the conditions under which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•OBD-II scanner
•Socket set
•Torque wrench
•Tire pressure gauge

Parts Required

•Replacement tires (if necessary)
•Suspension components (if damaged)
•Engine and transmission mounts (if worn)
•Driveshaft or CV joints (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components for wear or damage.
3
Check the engine and transmission mounts for signs of deterioration.
4
Examine the driveshaft and CV joints for any play or damage.
5
Scan for any Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
6
Test drive the vehicle to replicate the shaking and identify the conditions under which it occurs.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
If needed, lift the vehicle using a jack and secure it with jack stands.

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the hubcaps or wheel covers if applicable.
2. Loosen the lug nuts slightly while the vehicle is still on the ground.
3. Lift the vehicle and remove the wheels.
4. Inspect tires for uneven wear, bulges, or damage. Replace if necessary.
5. Reinstall wheels and torque lug nuts to manufacturer specifications (typically 80-100 ft-lbs).

3. Suspension Component Inspection

Sub-steps:
1. Inspect the control arms, bushings, and struts for any signs of wear or damage.
2. Replace any worn components with OEM parts.
3. Ensure all bolts are torqued to manufacturer specifications.

4. Engine and Transmission Mount Replacement

Sub-steps:
1. Locate the engine and transmission mounts.
2. Using a jack, support the engine or transmission.
3. Remove the bolts securing the mounts and replace with new mounts.
4. Torque the new mounts to specified values.

5. Driveshaft and CV Joint Inspection

Sub-steps:
1. Inspect the driveshaft for any signs of damage or excessive play.
2. Check CV joints for torn boots or signs of wear.
3. Replace any damaged components, ensuring proper alignment and torque.