why does my Honda Accord 9th Generation (2013-2017) make clicking noises when turning

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

511 words

Problem Statement

Learn how to diagnose and fix clicking noises when turning in Honda Accord 2013-2017. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before starting any electrical or component work.

Symptoms

•Clicking noise when turning the steering wheel
•Noise may become louder during sharper turns
•Possible vibration felt in the steering wheel
•Potential for reduced steering responsiveness
•Noise may persist regardless of speed

Diagnostic Steps

1
Inspect the CV (Constant Velocity) joints for signs of wear or damage.
2
Check the steering linkage for any loose or damaged components.
3
Examine the wheel bearings for excessive play or noise.
4
Inspect suspension components such as struts and control arms for wear.
5
Verify the tightness of lug nuts and wheel mounting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Pliers
•Screwdrivers

Parts Required

•Replacement CV joint (if necessary)
•CV joint boot (if damaged)
•Tie rod ends (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the CV (Constant Velocity) joints for signs of wear or damage.
2
Check the steering linkage for any loose or damaged components.
3
Examine the wheel bearings for excessive play or noise.
4
Inspect suspension components such as struts and control arms for wear.
5
Verify the tightness of lug nuts and wheel mounting.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to avoid electrical shorts.

2. Inspect and Replace CV Joints

Remove the Wheel:
- Use a jack to lift the vehicle and secure it with jack stands.
- Remove the lug nuts using a socket set and take off the wheel.
Examine the CV Joint:
- Inspect the CV joint boot for cracks or tears; replace if damaged.
- Check for any grease leakage; this indicates a failing CV joint.
Replace the CV Joint (if necessary):
- Remove the axle nut using a torque wrench.
- Disconnect the CV joint from the transmission by removing the retaining clip.
- Install the new CV joint, ensuring it is secured with the retaining clip.
- Reattach the axle nut and torque it to manufacturer specifications (usually around 150 ft-lbs).

3. Inspect and Tighten Steering Components

Check Steering Linkage:
- Inspect the tie rod ends and ball joints for wear.
- Tighten any loose connections and replace worn components.
Reassemble the Wheel:
- Reinstall the wheel and hand-tighten the lug nuts.
- Lower the vehicle and torque the lug nuts to the manufacturer's specifications (typically 80 ft-lbs).

4. Final Checks

Reconnect the negative battery terminal.
Start the vehicle and check for any clicking noises while turning the steering wheel.