why does my Honda Accord 9th Generation (2013-2017) make a loud noise when turning

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

592 words

Problem Statement

Discover the causes and solutions for loud noise when turning in Honda Accord 9th Generation. Step-by-step guide for diagnosis and repair.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Use jack stands to secure the vehicle before working underneath it.
•Always wear safety glasses and gloves while performing repairs.

Symptoms

•Loud grinding or clunking noise during turns
•Difficulty steering or a loose steering wheel
•Uneven tire wear
•Vibration in the steering wheel while turning
•Noise that increases with speed

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the suspension components (e.g., control arms, bushings).
3
Examine the CV joints for any signs of wear or damage.
4
Test the power steering pump for functionality and noise.
5
Inspect the wheel bearings for play or roughness.
6
Check the tire pressure and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Fluid pump
•Socket set
•Wrenches
•Jack and jack stands
•Bearing puller
•Torque wrench

Parts Required

•Power steering fluid
•Suspension components (if damaged)
•CV joint or axle (if necessary)
•Wheel bearings (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the suspension components (e.g., control arms, bushings).
3
Examine the CV joints for any signs of wear or damage.
4
Test the power steering pump for functionality and noise.
5
Inspect the wheel bearings for play or roughness.
6
Check the tire pressure and condition.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and set the parking brake.
Disconnect the battery (if applicable) for safety.

2. Inspect and Replace Power Steering Fluid

Tools Required: Fluid pump, power steering fluid.
Steps:
1. Locate the power steering reservoir.
2. Remove the cap and check the fluid level; add fluid if low.
3. If the fluid is dark or contaminated, drain the old fluid using a fluid pump.
4. Refill with manufacturer-recommended power steering fluid.
5. Replace the reservoir cap securely.

3. Inspect and Replace Suspension Components (if damaged)

Tools Required: Socket set, wrenches, jack and jack stands.
Steps:
1. Lift the vehicle using a jack and secure it on jack stands.
2. Remove the wheel to access suspension components.
3. Inspect control arms, bushings, and links for damage or wear.
4. Replace any damaged components using appropriate torque specifications.
5. Reinstall the wheel and lower the vehicle.

4. Inspect and Replace CV Joints

Tools Required: Socket set, CV joint replacement kit.
Steps:
1. Raise the vehicle and remove the wheel.
2. Check the CV boots for tears or leaks.
3. If damaged, remove the axle assembly.
4. Replace the CV joint or axle as necessary.
5. Reinstall the axle, ensuring it is secured properly.

5. Wheel Bearing Inspection and Replacement

Tools Required: Bearing puller, torque wrench.
Steps:
1. Remove the wheel and brake assembly to access the hub.
2. Check for play or roughness in the wheel bearing by spinning it.
3. If faulty, remove the old bearing using a bearing puller.
4. Install a new bearing, ensuring it is pressed in correctly.
5. Reassemble the wheel and brake components.