why does my Honda Accord 9th Generation (2013-2017) make a loud noise when starting?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

495 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loud noise when starting Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting components.

Symptoms

•Loud grinding or rattling noise during engine start
•Engine may struggle to turn over or start
•Possible flickering of dashboard warning lights
•Unusual vibrations felt through the chassis
•Noisy starter motor operation

Diagnostic Steps

1
Check for any stored error codes using an OBD-II scanner.
2
Inspect the battery voltage and connections for corrosion or looseness.
3
Examine the starter motor and its solenoid for signs of wear or damage.
4
Listen for the noise while a helper attempts to start the engine to pinpoint the source.
5
Inspect the flywheel for damage or missing teeth.
6
Check the engine mounts for wear or failure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Wrenches
•Socket set
•Torque wrench
•Inspection mirror

Parts Required

•New starter motor (if necessary)
•New battery (if necessary)
•Flywheel (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any stored error codes using an OBD-II scanner.
2
Inspect the battery voltage and connections for corrosion or looseness.
3
Examine the starter motor and its solenoid for signs of wear or damage.
4
Listen for the noise while a helper attempts to start the engine to pinpoint the source.
5
Inspect the flywheel for damage or missing teeth.
6
Check the engine mounts for wear or failure.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety.

2. Inspect and Replace Battery

Tools Required: Multimeter, wrenches
- Use a multimeter to check battery voltage. A healthy battery should read around 12.6V.
- If voltage is low, charge or replace the battery.
- Clean battery terminals with a wire brush and reconnect securely.

3. Examine and Replace Starter Motor

Tools Required: Socket set, torque wrench
- Remove any covers obstructing access to the starter motor.
- Disconnect electrical connectors from the starter motor.
- Remove the starter motor mounting bolts and carefully extract the starter.
- Replace with a new starter motor, ensuring proper alignment.
- Torque the mounting bolts to manufacturer specifications (typically around 10-15 ft-lbs).
- Reconnect electrical connections securely.

4. Inspect and Repair Flywheel (if necessary)

Tools Required: Inspection mirror, socket set
- If the starter motor replacement does not resolve the issue, inspect the flywheel for damage.
- If teeth are damaged, the transmission will need to be removed to replace the flywheel.
- Replace the flywheel ensuring proper torque on all bolts.