why does my Honda Accord 9th Generation (2013-2017) make a loud noise when I brake

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

533 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loud brake noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted before working on the brakes.
•Always disconnect the battery when working on electrical components.

Symptoms

•Loud grinding or squeaking noise when brakes are applied
•Vibration or pulsation in the brake pedal
•Decreased braking performance or responsiveness
•Brake warning light illuminated on the dashboard
•Unusual wear on brake pads or rotors

Diagnostic Steps

1
Inspect the brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring, grooves, or warping.
3
Examine the brake calipers for proper operation and any sticking issues.
4
Test the brake system fluid level and condition.
5
Use a multimeter to check for any electrical issues if equipped with electronic brake assist.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake grease
•Multimeter (optional)

Parts Required

•Brake pads
•Brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring, grooves, or warping.
3
Examine the brake calipers for proper operation and any sticking issues.
4
Test the brake system fluid level and condition.
5
Use a multimeter to check for any electrical issues if equipped with electronic brake assist.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Use wheel chocks for safety.
Disconnect the battery to prevent any electrical issues.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Remove the wheel lug nuts with a lug wrench and take off the wheel.

3. Inspect and Replace Brake Pads

Inspection: Check the thickness of the brake pads; if less than 3mm, replacement is necessary.
Replacement:
1. Remove the caliper bolts using a socket wrench.
2. Carefully slide the caliper off the rotor.
3. Remove the old brake pads from the caliper bracket.
4. Install new brake pads ensuring proper orientation.
5. Apply brake grease to the backing of the pads to reduce noise.

4. Inspect and Replace Brake Rotors (if needed)

Inspection: Check for grooves or scoring on the rotors.
Replacement:
1. If the rotor is damaged, remove the caliper bracket by unscrewing the bolts.
2. Slide off the rotor; you may need to remove retaining screws if applicable.
3. Install a new rotor, ensuring it is seated properly.
4. Reattach the caliper bracket and torque bolts to manufacturer specifications (typically around 80-100 ft-lbs).

5. Reassemble and Test

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to manufacturer specifications (typically 80-100 ft-lbs).
Reconnect the battery.
Pump the brake pedal several times to seat the pads and check for proper operation.