why does my Honda Accord 9th Generation (2013-2017) make a grinding noise when I brake

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

601 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Honda Accord 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the braking system.
•Allow the vehicle to cool down before touching hot brake components.

Symptoms

•Grinding noise when applying brakes
•Vibrations felt in the brake pedal
•Reduced braking efficiency
•Warning light on the dashboard (if applicable)
•Excessive brake dust on the wheels

Diagnostic Steps

1
Inspect the brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring or warping.
3
Measure the thickness of the brake pads with a caliper.
4
Inspect the brake calipers for proper function and any signs of sticking.
5
Examine the brake lines for leaks or damage.
6
Test drive the vehicle to replicate the noise and assess braking performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Brake cleaner
•Caliper tool
•Socket set
•Torque wrench
•Safety goggles

Parts Required

•Brake pads
•Brake rotors (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring or warping.
3
Measure the thickness of the brake pads with a caliper.
4
Inspect the brake calipers for proper function and any signs of sticking.
5
Examine the brake lines for leaks or damage.
6
Test drive the vehicle to replicate the noise and assess braking performance.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, brake cleaner, caliper tool, socket set, torque wrench, and safety goggles.
Ensure the vehicle is parked on a flat surface and the emergency brake is engaged.
Disconnect the battery for safety before starting work on the braking system.

2. Remove Wheel and Brake Components

Loosen the lug nuts on the front or rear wheel where the noise is occurring.
Use the jack to lift the vehicle and secure it with jack stands.
Remove the wheel using the lug wrench.
Remove the brake caliper by unscrewing the caliper bolts (typically 12mm or 14mm).
Carefully slide the caliper off the rotor and support it without putting stress on the brake line.

3. Inspect and Replace Brake Components

Inspect Brake Pads:
- Check the thickness of the brake pads; replace if they are worn down to 3mm or less.
- Look for uneven wear patterns indicating caliper issues.
Inspect Brake Rotors:
- Look for deep grooves, scoring, or warping. If damaged, the rotors will need to be resurfaced or replaced.
Replace Brake Pads and Rotors (if necessary):
- If replacing pads, remove the old pads and install new ones, ensuring they are properly aligned.
- If replacing rotors, remove the old rotor and install the new rotor, ensuring it is seated correctly.

4. Reassemble and Torque

Reinstall the brake caliper and tighten the caliper bolts to the manufacturer's specifications (typically 20-30 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and then torque the lug nuts to the manufacturer's specifications (typically 80-100 ft-lbs).

5. Final Checks

Reconnect the battery.
Pump the brakes a few times to ensure proper seating of the brake pads against the rotors.