why does my Honda Accord 9th Generation (2013-2017) make a clunking noise when turning

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

547 words

Problem Statement

Learn how to diagnose and fix clunking noise when turning in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Use jack stands to support the vehicle securely while working underneath.

Symptoms

•Clunking noise during sharp turns
•Noise increases with speed while turning
•Vibration felt in the steering wheel
•Unusual tire wear patterns
•Steering feels loose or unresponsive

Diagnostic Steps

1
Inspect the suspension components for wear or damage, including control arms, bushings, and struts.
2
Examine the CV joints and axles for any signs of damage or play.
3
Check the power steering fluid level and inspect for leaks.
4
Test the steering system for any unusual play or resistance.
5
Inspect the wheel bearings for wear and noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Pry bar
•CV joint boot clamp tool
•Jack stands
•Wrench set
•Visual inspection tools

Parts Required

•CV joint or axle assembly
•Suspension bushings (if worn)
•Wheel bearings (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components for wear or damage, including control arms, bushings, and struts.
2
Examine the CV joints and axles for any signs of damage or play.
3
Check the power steering fluid level and inspect for leaks.
4
Test the steering system for any unusual play or resistance.
5
Inspect the wheel bearings for wear and noise.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace CV Joints

Tools Required: Socket set, torque wrench, pry bar, CV joint boot clamp tool, jack stands.
Raise the front of the vehicle and secure it on jack stands.
Remove the wheel on the affected side using the socket set.
Inspect the CV joint for torn boots or excessive play.
If damaged, remove the axle nut and disconnect the CV joint from the hub assembly using the pry bar.
Replace the CV joint or complete axle as necessary, ensuring to install new boots and clamps.

3. Inspect Suspension Components

Tools Required: Wrench set, torque wrench, visual inspection tools.
While the vehicle is still on jack stands, visually inspect all suspension components, including control arms, struts, and bushings.
Replace any worn or damaged components, tightening to manufacturer specifications using a torque wrench.

4. Inspect Wheel Bearings

Tools Required: Socket set, torque wrench.
Remove the hub assembly if necessary to access the wheel bearing.
Check for play or roughness in the bearing; replace if any issues are found.
Reassemble the hub and tighten all fasteners to the manufacturer's specifications.

5. Reassemble and Test

Reinstall the wheel and lower the vehicle.
Reconnect the battery.
Test drive the vehicle to verify the clunking noise has been resolved.