why does my Honda Accord 9th Generation (2013-2017) have a rough transmission shift

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

583 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix rough transmission shifts in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the radiator or working on the transmission.

Symptoms

•Jerky or harsh shifting during acceleration
•Delay in gear engagement
•Unusual grinding or whining noises during shifting
•Check engine light illuminated
•Increased RPMs without corresponding acceleration
•Transmission fluid leakage

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related codes.
2
Inspect the transmission fluid level and condition; ensure it is at the proper level and not burnt or contaminated.
3
Check for any visible leaks around the transmission case and associated components.
4
Inspect the transmission mounts for wear or damage that could affect shifting.
5
Test the vehicle's throttle position sensor (TPS) to ensure proper function during shifting.
6
Verify the operation of the transmission control module (TCM) and its connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Funnel
•Socket set
•Torque wrench
•Floor jack
•Jack stands

Parts Required

•Transmission fluid
•Transmission filter
•Transmission fluid gasket
•Transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related codes.
2
Inspect the transmission fluid level and condition; ensure it is at the proper level and not burnt or contaminated.
3
Check for any visible leaks around the transmission case and associated components.
4
Inspect the transmission mounts for wear or damage that could affect shifting.
5
Test the vehicle's throttle position sensor (TPS) to ensure proper function during shifting.
6
Verify the operation of the transmission control module (TCM) and its connections.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical issues while working.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, funnel, socket set, torque wrench.
Sub-steps:
1. Locate the transmission fluid dipstick or fill plug.
2. Remove the dipstick or fill plug and check the fluid level.
3. If fluid is low, use a transmission fluid pump to add the correct type of fluid (consult owner’s manual for specifications).
4. If fluid is dirty or burnt, drain the transmission fluid through the drain plug, and replace it with new fluid.
5. Reinstall the drain plug and torque to the manufacturer’s specifications.

3. Inspect and Replace Transmission Filter (if applicable)

Tools Required: Socket set, transmission filter kit.
Sub-steps:
1. Remove the transmission oil pan using a socket set.
2. Inspect the old filter for debris and replace it with a new one from the transmission filter kit.
3. Clean the oil pan and replace the gasket, ensuring a proper seal.
4. Reinstall the oil pan and torque bolts to specified values.

4. Check Transmission Mounts

Tools Required: Floor jack, jack stands, socket set.
Sub-steps:
1. Raise the vehicle using a floor jack and secure it with jack stands.
2. Inspect the transmission mounts for cracks or signs of wear.
3. If mounts are damaged, remove the old mounts and install new ones, making sure to torque bolts to specifications.