FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Accord 9th Generation (2013-2017) have a rough idle when warmed up - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/why does my Honda Accord 9th Generation (2013-2017) have a rough idle when warmed up

why does my Honda Accord 9th Generation (2013-2017) have a rough idle when warmed up

Honda Accord Eleventh Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
539 words

Problem Statement

Learn how to diagnose and fix rough idle issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on the intake or throttle body.

Symptoms

  • •Rough engine idle when at operating temperature
  • •Engine stalling during idle
  • •Poor fuel economy
  • •Increased emissions
  • •Possible check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Throttle body cleaner
  • •Spark plug socket
  • •Ratchet
  • •MAF cleaner
  • •Soft cloth

Parts Required

  • •Spark plugs (if worn or damaged)
  • •Air intake duct gaskets (if necessary)
  • •Vacuum hoses (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Allow the engine to cool down if it has been running recently.
2. Inspect and Clean Throttle Body
  • Remove the air intake duct connected to the throttle body.
  • Use throttle body cleaner and a soft cloth to clean the throttle plate and surrounding area.
  • Ensure the throttle plate moves freely and is not sticking.
  • Reinstall the air intake duct securely.
3. Replace Spark Plugs (if necessary)
  • Remove the ignition coils by unscrewing the retaining bolts and gently pulling them out.
  • Remove the old spark plugs using a spark plug socket and ratchet.
  • Check the gap on new spark plugs and adjust if necessary.
  • Install the new spark plugs, ensuring they are torqued to the manufacturer’s specifications (usually around 13-16 lb-ft).
  • Reattach the ignition coils.
4. Check for Vacuum Leaks
  • Inspect vacuum hoses for cracks or disconnections.
  • Replace any damaged hoses with new ones.
  • If applicable, use a smoke machine to detect leaks in the intake manifold.
5. Clean or Replace MAF Sensor
  • Disconnect the MAF sensor connector.
  • Remove the MAF sensor from the intake system.
  • Use MAF cleaner to carefully clean the sensor element.
  • Reinstall the MAF sensor and reconnect its electrical connector.