why does my Honda Accord 9th Generation (2013-2017) have a loud noise when accelerating

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

556 words

Problem Statement

Discover how to diagnose and fix loud noise when accelerating in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the exhaust system.

Symptoms

•Loud noise that increases with acceleration
•Vibration felt through the steering wheel or floor
•Unusual rattling or clunking sounds
•Possible loss of power during acceleration
•Check engine light may be illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential engine issues.
2
Inspect the exhaust system visually for any signs of leaks, damage, or loose components.
3
Check engine mounts for wear or damage that could cause excess engine movement.
4
Examine the drivetrain components for any signs of wear or abnormal noises.
5
Test drive the vehicle while listening for noise characteristics to pinpoint the source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Exhaust hanger removal tool
•Jack and jack stands
•Pipe cutter or saw

Parts Required

•Exhaust sections (if damaged)
•Engine mounts (if worn)
•CV joint or boot kits (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential engine issues.
2
Inspect the exhaust system visually for any signs of leaks, damage, or loose components.
3
Check engine mounts for wear or damage that could cause excess engine movement.
4
Examine the drivetrain components for any signs of wear or abnormal noises.
5
Test drive the vehicle while listening for noise characteristics to pinpoint the source.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace Exhaust Components

Remove the exhaust heat shield (if applicable) using a socket set.
Inspect the exhaust pipes and muffler for cracks or holes.
- Tools Required: Socket set, exhaust hanger removal tool.
Tighten or replace any loose or damaged exhaust clamps or hangers.
If damage is found, replace the faulty section of the exhaust:
- Mark and cut the damaged section of the pipe.
- Use a pipe cutter or saw for a clean cut.
- Install a new exhaust section with appropriate clamps and gaskets.

3. Check and Replace Engine Mounts

Locate the engine mounts and inspect for cracks or excessive wear.
- Tools Required: Socket set, pry bar.
Remove the old engine mount:
- Support the engine with a jack and a block of wood.
- Remove the bolts securing the mount to the engine and chassis.
Install the new engine mount:
- Position the new mount and secure it with bolts to the engine and chassis.
- Torque the bolts to the manufacturer’s specifications.

4. Inspect and Repair Drivetrain Components

Check CV joints and boots for any signs of wear or tearing.
- Replace any damaged CV boots or joints if necessary.
Examine the differential for any unusual noises or leaks.
- If noise persists, consider fluid replacement or further inspection.