FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Accord 9th Generation (2013-2017) have a delayed throttle response - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/why does my Honda Accord 9th Generation (2013-2017) have a delayed throttle response

why does my Honda Accord 9th Generation (2013-2017) have a delayed throttle response

Honda Accord Eleventh Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
517 words

Problem Statement

Learn how to diagnose and fix delayed throttle response in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems
  • •Allow engine to cool before performing any maintenance

Symptoms

  • •Throttle lag during acceleration
  • •Unresponsive engine when pressing the accelerator pedal
  • •Engine revs but car does not accelerate as expected
  • •Sudden surge in power after a delay
  • •Check engine light may be illuminated
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Throttle body cleaner
  • •Soft cloth
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge

Parts Required

  • •Accelerator pedal position sensor (if faulty)
  • •MAF sensor (if dirty or faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Disconnect the battery to prevent electrical shorts.
2. Throttle Body Cleaning
  • Tools Required: Throttle body cleaner, soft cloth, socket set.
  • Remove the air intake duct connected to the throttle body.
  • Use throttle body cleaner and a soft cloth to clean the throttle plate and bore.
  • Reconnect the air intake duct securely.
3. Replace Accelerator Pedal Position Sensor (if faulty)
  • Tools Required: Socket set, torque wrench.
  • Locate the accelerator pedal position sensor under the dashboard.
  • Disconnect the electrical connector from the sensor.
  • Remove the mounting screws and take out the old sensor.
  • Install the new sensor and secure it with screws.
  • Reconnect the electrical connector.
4. Clean or Replace MAF Sensor
  • Tools Required: MAF sensor cleaner, socket set.
  • Locate the MAF sensor in the intake duct.
  • Carefully disconnect the electrical connector and remove the sensor.
  • Spray MAF sensor cleaner on the sensor elements and let it dry completely.
  • Reinstall the sensor and reconnect the electrical connector.
5. Fuel System Check
  • Tools Required: Fuel pressure gauge.
  • Locate the fuel rail and attach the fuel pressure gauge.
  • Turn the ignition key to the "ON" position (do not start) and check the fuel pressure readings.
  • If the pressure is below specifications, inspect the fuel pump and fuel filter for issues.