FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Accord 9th Generation (2013-2017) check engine light turn on intermittently - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/why does my Honda Accord 9th Generation (2013-2017) check engine light turn on intermittently

why does my Honda Accord 9th Generation (2013-2017) check engine light turn on intermittently

Honda Accord Eleventh Generation (2023-present)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
503 words

Problem Statement

Learn how to diagnose and fix intermittent check engine light issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures.

Affected Component
Engine
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical components.
  • •Allow the engine to cool before performing any inspections or repairs.

Symptoms

  • •Intermittent check engine light illumination
  • •Fluctuating engine performance
  • •Reduced fuel efficiency
  • •Engine stalling or hesitation during acceleration
  • •Poor acceleration response
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter

Parts Required

  • •Gas cap (if damaged)
  • •Spark plugs (if worn)
  • •Ignition coils (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools including an OBD-II scanner, socket set, and multimeter.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Disconnect the battery negative terminal to prevent electrical shorts.
2. Retrieve Trouble Codes
  • Connect the OBD-II scanner to the vehicle’s diagnostic port.
  • Turn the ignition to the "ON" position without starting the engine.
  • Read and record any trouble codes displayed on the scanner.
3. Inspect and Replace Components

3.1 Gas Cap Inspection

  • Remove the gas cap and inspect for cracks or damage.
  • Replace the gas cap if necessary with a manufacturer-approved part.

3.2 Spark Plug and Ignition Coil Check

  • Remove the ignition coils from the spark plugs using a socket set.
  • Inspect the spark plugs for wear and carbon buildup; replace if worn.
  • Test ignition coils with a multimeter; replace any faulty coils.

3.3 Vacuum Line Inspection

  • Conduct a visual inspection of all vacuum lines in the engine bay.
  • Replace any cracked or disconnected vacuum hoses.
4. Clear Codes and Test Drive
  • Clear the trouble codes using the OBD-II scanner.
  • Reconnect the battery terminal.
  • Start the engine and take the vehicle for a test drive to monitor for check engine light reappearance.