why do my brakes squeak when I first start my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

460 words

Problem Statement

Learn how to diagnose and fix squeaking brakes on Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety goggles and gloves when working with brake components.
•Ensure vehicle is securely lifted and supported with jack stands before working underneath.

Symptoms

•Squeaking noise when brakes are applied after starting the vehicle
•Noise diminishes after a few applications of the brakes
•Possible vibration or pulsation felt through the brake pedal
•Reduced braking performance immediately after starting
•Presence of moisture or dust on brake components

Diagnostic Steps

1
Inspect brake pads for wear and ensure they are properly seated.
2
Check for dust, dirt, or moisture on brake rotors and pads.
3
Listen for squeaking noise while performing a visual inspection of calipers and brake hardware.
4
Examine brake fluid levels and condition.
5
Ensure that brake components are not rusted or corroded.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Brake cleaner spray
•Torque wrench
•Anti-squeal lubricant

Parts Required

•Brake pads (if replacement is necessary)
•Brake rotors (if resurfacing or replacement is needed)
•Brake hardware (clips or shims as necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and ensure they are properly seated.
2
Check for dust, dirt, or moisture on brake rotors and pads.
3
Listen for squeaking noise while performing a visual inspection of calipers and brake hardware.
4
Examine brake fluid levels and condition.
5
Ensure that brake components are not rusted or corroded.

Solution

1. Preparation

Gather tools and safety equipment.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Inspect Brake Pads and Rotors

Remove the wheel using a socket set.
Check the thickness of the brake pads; replace if they are below manufacturer's specifications (usually 3mm).
Inspect the brake rotor surface for scoring or pitting; if damaged, resurface or replace the rotor.

3. Clean Brake Components

Use brake cleaner spray to remove dust, dirt, and moisture from brake pads and rotors.
Apply a small amount of anti-squeal lubricant to the back of the brake pads to dampen noise.

4. Check Brake Hardware

Inspect caliper brackets and mounting hardware for any signs of wear or damage.
Replace any worn or damaged clips or shims as needed.

5. Reassemble and Test

Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications (usually 80-100 ft-lbs).
Lower the vehicle and perform a test drive to ensure the squeaking noise has been resolved.