what causes steering column noise when turning in Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

485 words

Problem Statement

Learn how to diagnose and fix steering column noise when turning in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any work under the hood.

Symptoms

•Unusual clicking or popping noises when turning the steering wheel
•Grinding noise accompanied by steering input
•Increased resistance or stiffness in the steering wheel
•Noise that changes with the speed of the vehicle or turning angle
•Vibration felt through the steering wheel

Diagnostic Steps

1
Inspect power steering fluid level and condition.
2
Check for any visible wear or damage to the steering column components.
3
Examine the steering linkage and joints for play or wear.
4
Listen for noise while turning the wheel with the vehicle stationary.
5
Test the steering system while driving to assess noise and responsiveness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Fluid pump
•Funnel
•Wrench set
•Socket set
•Torque wrench
•Grease

Parts Required

•Power steering fluid
•Replacement tie rod ends (if applicable)
•Replacement ball joints (if applicable)
•Steering column lubricant

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect power steering fluid level and condition.
2
Check for any visible wear or damage to the steering column components.
3
Examine the steering linkage and joints for play or wear.
4
Listen for noise while turning the wheel with the vehicle stationary.
5
Test the steering system while driving to assess noise and responsiveness.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery for safety.

2. Check and Replace Power Steering Fluid

Tools Required: Fluid pump, funnel, container for old fluid
Drain the old power steering fluid from the reservoir using a fluid pump.
Refill with the manufacturer-recommended power steering fluid.
Inspect for leaks in hoses and connections.

3. Inspect and Lubricate Steering Column Components

Tools Required: Wrench set, grease
Remove any covers shielding the steering column.
Inspect joints, bushings, and bearings for wear.
Apply appropriate lubricant to all moving parts, including the steering shaft and universal joints.

4. Replace Worn Steering Components

Tools Required: Socket set, torque wrench, replacement parts
Identify and replace any worn components such as tie rod ends or ball joints.
Ensure all new parts are properly torqued to manufacturer specifications.

5. Reassemble and Test

Reinstall all covers and components removed during inspection.
Reconnect the battery.
Start the vehicle and test the steering for noise and functionality.