my Honda Accord 9th Generation (2013-2017) wipers are stuck, what can I do?

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

539 words

Problem Statement

Learn how to diagnose and fix stuck wipers on 2013-2017 Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.

Symptoms

•Wipers do not move when activated
•Wipers are frozen in a specific position on the windshield
•No sound or motor noise when wiper switch is engaged
•Wiper fluid does not spray
•Possible presence of a blown fuse

Diagnostic Steps

1
Check the wiper switch operation by toggling it through all settings.
2
Inspect the wiper fuse in the fuse box for any signs of damage or blown fuse.
3
Examine the wiper motor for any visible damage or disconnection.
4
Inspect the wiper linkage for signs of binding or mechanical obstruction.
5
Test the wiper motor directly with a multimeter to ensure it receives power.
6
Check for any ice or debris blocking the wiper movement.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Screwdriver
•Multimeter
•Fuse puller or needle-nose pliers

Parts Required

•Replacement wiper fuse (if blown)
•Wiper motor (if defective)
•Wiper linkage (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the wiper switch operation by toggling it through all settings.
2
Inspect the wiper fuse in the fuse box for any signs of damage or blown fuse.
3
Examine the wiper motor for any visible damage or disconnection.
4
Inspect the wiper linkage for signs of binding or mechanical obstruction.
5
Test the wiper motor directly with a multimeter to ensure it receives power.
6
Check for any ice or debris blocking the wiper movement.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the ignition off.
Disconnect the battery to prevent electrical shock while working.

2. Inspect Fuse

Tools Required: Fuse puller or needle-nose pliers
Locate the fuse box, typically found under the dashboard on the driver's side.
Identify the wiper fuse using the diagram on the fuse box cover.
Remove the fuse and inspect it for continuity. Replace it if blown.

3. Check Wiper Motor and Linkage

Tools Required: Socket set, screwdriver
Remove the wiper arms by loosening the nut using a socket wrench.
Carefully pull the wiper arms off the splines.
Remove the cowl panel covering the wiper motor and linkage.
Inspect the wiper motor for any visible damage and check the electrical connector for corrosion.
Test the linkage for smooth operation. If it’s stuck, lubricate or replace it.

4. Test Wiper Motor

Tools Required: Multimeter
Reconnect the battery.
Use a multimeter to check voltage at the wiper motor connector while activating the wiper switch.
If the motor does not receive power, trace the wiring back to the switch for continuity.

5. Reassemble Components

Reattach the wiper linkage and motor.
Replace the cowl panel and secure it with screws.
Reinstall the wiper arms in the correct position and tighten the nuts.