my Honda Accord 9th Generation (2013-2017) transmission makes a loud noise when shifting

Solution

1. Preparation

• Gather all necessary tools and parts.
• Ensure the vehicle is on a level surface and secure it with jack stands.
• Disconnect the battery to prevent electrical issues during repair.

2. Fluid Change

• Tools Required: Transmission fluid pump, drain pan, funnel, socket set.
• Sub-steps:
  1. Place a drain pan under the transmission pan.
  2. Remove the transmission pan bolts using a socket wrench.
  3. Carefully lower the pan and allow the old fluid to drain completely.
  4. Inspect the pan for metal shavings or debris; clean it thoroughly.
  5. Replace the transmission filter (if applicable) by removing the old filter and installing the new one.
  6. Reinstall the transmission pan with a new gasket and torque the bolts to the manufacturer's specifications (typically around 8-10 ft-lbs).

3. Inspect and Replace Mounts (if necessary)

• Tools Required: Socket set, torque wrench, pry bar.
• Sub-steps:
  1. Locate the transmission mounts and inspect for cracks or excessive wear.
  2. If damaged, use a socket to remove the bolts securing the mount to the transmission and chassis.
  3. Position the new mount in place and hand-tighten the bolts.
  4. Torque the bolts to specifications (check the service manual for exact torque values).

4. Adjust Linkage/Cables

• Tools Required: Wrench set, adjustment tool (if needed).
• Sub-steps:
  1. Inspect the linkage and cables for proper alignment and function.
  2. If misaligned, adjust the linkage or cable tension according to the specifications in the service manual.
  3. Ensure that all connections are secure and functioning smoothly.