FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord 9th Generation (2013-2017) lights flicker when I drive what's wrong - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/my Honda Accord 9th Generation (2013-2017) lights flicker when I drive what's wrong

my Honda Accord 9th Generation (2013-2017) lights flicker when I drive what's wrong

Honda Accord Eleventh Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
535 words

Problem Statement

Learn how to diagnose and fix flickering lights in your 2013-2017 Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before starting work.

Symptoms

  • •Flickering or dimming of headlights
  • •Dashboard lights fluctuating in brightness
  • •Battery warning light illuminated
  • •Electrical accessories intermittently losing power
  • •Difficulty starting the vehicle after it has been running

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Wrench set
  • •OBD-II scanner

Parts Required

  • •New battery (if necessary)
  • •New alternator (if necessary)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required:
    • Multimeter
    • Socket set
    • Wrench set
    • OBD-II scanner
  • Safety Warnings:
    • Disconnect the battery before working on electrical systems.
    • Allow the engine to cool before starting work.
2. Inspect Battery and Connections
  • Remove the negative battery cable first, followed by the positive cable.
  • Clean any corrosion from the battery terminals using a wire brush and a mixture of baking soda and water.
  • Reconnect the battery, ensuring tight connections.
3. Check and Replace Battery
  • Testing Battery:
    • Use a multimeter to check the battery voltage. It should read around 12.6 volts when the engine is off.
  • If the voltage is low, replace the battery with a new one of the same specifications (usually a Group 51R for Honda Accord).
4. Inspect and Replace Alternator
  • Removal of Alternator:

    • Disconnect the negative battery terminal.
    • Remove the alternator belt by loosening the tensioner pulley with a socket set.
    • Disconnect the wiring harness from the alternator.
    • Remove the mounting bolts securing the alternator and take it out.
  • Installation of New Alternator:

    • Position the new alternator in place and secure it with the mounting bolts (torque to manufacturer specifications).
    • Reconnect the wiring harness and reattach the alternator belt, ensuring proper tension.
5. Verify System Functionality
  • Reconnect the negative battery terminal.
  • Start the engine and use a multimeter to check the alternator output voltage; it should read between 13.8 to 14.4 volts.
  • Monitor the lights and electrical systems for any flickering or dimming.