my Honda Accord 9th Generation (2013-2017) keeps dying while driving what's wrong

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

508 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Relieve fuel system pressure before servicing fuel components.

Symptoms

•Check engine light illuminated
•Engine stalling at idle or during acceleration
•Rough idle or hesitation during acceleration
•Loss of power while driving
•Inconsistent engine performance
•Difficulty restarting the engine after stalling

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any diagnostic trouble codes (DTCs).
2
Check the battery voltage and connections for corrosion or loose terminals.
3
Inspect the fuel pump operation by listening for a humming sound from the fuel tank when the ignition is turned on.
4
Test the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
5
Examine the ignition system components, including spark plugs, ignition coils, and wiring for any signs of wear or damage.
6
Inspect the air intake system for blockages or leaks that may affect engine performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Throttle body cleaner

Parts Required

•Fuel pump (if faulty)
•Fuel filter (if applicable)
•Spark plugs
•Ignition coils

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any diagnostic trouble codes (DTCs).
2
Check the battery voltage and connections for corrosion or loose terminals.
3
Inspect the fuel pump operation by listening for a humming sound from the fuel tank when the ignition is turned on.
4
Test the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
5
Examine the ignition system components, including spark plugs, ignition coils, and wiring for any signs of wear or damage.
6
Inspect the air intake system for blockages or leaks that may affect engine performance.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety during repairs.

2. Address Fuel Delivery Issues

Check Fuel Pump Functionality
- If the fuel pump is not operating correctly, replace it.
- Tools required: Fuel pressure gauge, socket set.
- Safety warning: Relieve fuel system pressure before disconnecting fuel lines.
Replace Fuel Filter (if applicable)
- Locate the fuel filter (usually along the fuel line).
- Remove the fuel lines using appropriate tools and replace the filter.
- Ensure the new filter is installed in the correct direction.

3. Repair Ignition System

Replace Spark Plugs and Ignition Coils
- Remove the ignition coil by unscrewing it from its location.
- Replace the spark plugs using a spark plug socket and torque to manufacturer specifications (typically around 13-16 lb-ft).
- Reinstall the ignition coils and secure them properly.

4. Inspect and Clean Air Intake

Check for Blockages
- Remove the air intake duct and inspect for debris or restrictions.
- Clean the throttle body using throttle body cleaner.
- Reassemble the intake system ensuring all connections are secure.