my Honda Accord 9th Generation (2013-2017) is using too much oil what could be the issue

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

518 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in 2013-2017 Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before working on engine components.

Symptoms

•Oil level drops significantly between oil changes
•Blue smoke emitted from the exhaust
•Engine knocking or ticking noise
•Increased emissions during operation
•Possible oil leaks visible under the vehicle
•Poor engine performance or rough idling

Diagnostic Steps

1
Check for any active error codes using an OBD-II scanner.
2
Inspect the oil level and condition using the dipstick.
3
Examine the engine for external oil leaks.
4
Conduct a compression test on each cylinder.
5
Perform a leak-down test to assess internal engine sealing.
6
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
7
Check the valve cover gasket and seals for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Pliers
•Wrench set
•Socket set
•Torque wrench
•Gasket scraper

Parts Required

•PCV valve
•Valve cover gasket
•Engine oil (if needed for top-up)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any active error codes using an OBD-II scanner.
2
Inspect the oil level and condition using the dipstick.
3
Examine the engine for external oil leaks.
4
Conduct a compression test on each cylinder.
5
Perform a leak-down test to assess internal engine sealing.
6
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
7
Check the valve cover gasket and seals for wear or damage.

Solution

1. Preparation

Gather all required tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to ensure safety during repairs.

2. Inspect and Replace PCV Valve

Tools Required: Pliers, wrench set
Locate the PCV valve on the engine.
Remove the PCV valve by releasing the clips or bolts.
Inspect the valve for clogging or damage. If defective, replace with a new PCV valve.
Reinstall the new PCV valve securely.

3. Replace Valve Cover Gasket

Tools Required: Socket set, torque wrench, gasket scraper
Remove the engine cover if equipped.
Unscrew the bolts securing the valve cover using the socket set.
Carefully lift the valve cover off and remove the old gasket.
Clean the mating surfaces on the cylinder head and valve cover.
Place the new gasket into position and reattach the valve cover, tightening bolts to the manufacturer’s specified torque.

4. Address Internal Engine Issues (if necessary)

If compression and leak-down tests indicate internal issues, consider the following:
- Remove the cylinder head for inspection.
- Replace piston rings if worn (requires engine disassembly).
- Inspect cylinder walls for scoring or damage.