my Honda Accord 9th Generation (2013-2017) is shaking when I stop what could it be

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

490 words

Problem Statement

Learn how to diagnose and fix shaking when stopping in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is secured on jack stands before working underneath.
•Allow brake components to cool before handling.

Symptoms

•Shaking or vibration felt in the steering wheel and/or seat when stopping
•Increased noise from brakes or suspension components
•Pulsation in the brake pedal
•Uneven tire wear
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect brake components for wear or damage, including pads, rotors, and calipers.
2
Check for wheel alignment and suspension wear, including struts and bushings.
3
Scan the vehicle's computer for any stored error codes using an OBD-II scanner.
4
Inspect engine mounts for signs of wear or failure.
5
Test the brake fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors
•Engine mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake components for wear or damage, including pads, rotors, and calipers.
2
Check for wheel alignment and suspension wear, including struts and bushings.
3
Scan the vehicle's computer for any stored error codes using an OBD-II scanner.
4
Inspect engine mounts for signs of wear or failure.
5
Test the brake fluid level and condition.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Engage the parking brake.

2. Inspect and Replace Brake Components

Remove the Wheel:
- Use a jack to lift the vehicle and secure it on jack stands.
- Remove the lug nuts with a socket set and take off the wheel.
Inspect Brake Pads and Rotors:
- Examine the brake pads for thickness (should be at least 3mm) and look for uneven wear.
- Check the rotors for warping or scoring; they should be smooth and within manufacturer specifications.
Replace Components if Necessary:
- If pads are worn, remove the caliper bolts and slide the caliper off to replace the pads.
- If rotors are warped, remove the caliper bracket and replace the rotor.
- Reassemble all components in reverse order and torque bolts to manufacturer specifications.

3. Check Engine Mounts

Visual Inspection:
- Look for cracks or separation in the engine mounts.
Replace Mounts:
- If damaged, support the engine with a jack and remove the old mounts.
- Install new mounts and ensure they are torqued to specification.

4. Wheel Alignment and Suspension Check

Perform Wheel Alignment:
- Take the vehicle to a professional for a wheel alignment.
Inspect Suspension Components:
- Check struts, shocks, and other suspension parts for wear and replace as necessary.