my Honda Accord 9th Generation (2013-2017) is shaking when I brake

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

539 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on brakes.
•Make sure the vehicle is securely supported before working underneath it.

Symptoms

•Steering wheel shakes when braking
•Pulsating brake pedal feel
•Vehicle pulls to one side while braking
•Increased stopping distance
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pad thickness to ensure they are within specifications.
3
Examine suspension components (e.g., control arms, tie rods) for wear or damage.
4
Check wheel alignment and balance.
5
Inspect brake calipers for proper operation and any signs of sticking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Dial indicator
•Brake caliper tool
•Socket set

Parts Required

•Brake rotors
•Brake pads
•Brake caliper retaining screws (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pad thickness to ensure they are within specifications.
3
Examine suspension components (e.g., control arms, tie rods) for wear or damage.
4
Check wheel alignment and balance.
5
Inspect brake calipers for proper operation and any signs of sticking.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface and engage the parking brake.
Disconnect the battery if necessary for safety.

2. Remove Wheel

Loosen lug nuts while the vehicle is still on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Rotors

Inspection: Use a dial indicator to check the rotor runout; if it exceeds specifications (typically 0.002-0.005 inches), it needs replacement.
Removal:
- Remove the caliper by unscrewing the caliper bracket bolts (usually 14mm or 17mm).
- Secure the caliper using a bungee cord to avoid stressing the brake line.
- Unscrew the rotor retaining screws (if present) and slide off the rotor.
Replacement: Install new rotors, ensuring they are clean and free of oil. Torque retaining screws to manufacturer specifications (usually around 7-10 ft-lbs).

4. Replace Brake Pads

Remove old brake pads from the caliper bracket.
Compress the caliper piston using a brake caliper tool.
Install new brake pads into the caliper bracket.
Reattach the caliper over the new pads and torque bolts to manufacturer's specifications (usually around 20-30 ft-lbs).

5. Reassemble Wheel

Place the wheel back on the hub.
Hand-tighten lug nuts and lower the vehicle to the ground.
Torque the lug nuts to specifications (usually around 80-100 ft-lbs).

6. Test the Brakes

Once the vehicle is safely on the ground, pump the brake pedal to seat the pads against the rotors.
Conduct a test drive to ensure the brakes operate smoothly without shaking.