my Honda Accord 9th Generation (2013-2017) is consuming too much oil what should I do

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening the oil drain plug.

Symptoms

•Check engine light illuminated
•Oil level dropping quickly between changes
•Blue smoke from the exhaust
•Engine making unusual noises (ticking or knocking)
•Poor fuel economy
•Oil spots on the driveway or ground

Diagnostic Steps

1
Check the engine oil level and condition using the dipstick.
2
Inspect for external oil leaks around seals, gaskets, and oil pan.
3
Conduct a compression test on all cylinders to check for internal leaks.
4
Perform a cylinder leak-down test to identify potential valve or piston ring issues.
5
Use an OBD-II scanner to check for any related trouble codes.
6
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Compression tester
•Leak-down tester
•Oil filter wrench
•Socket set
•Pliers

Parts Required

•New PCV valve
•Engine oil (recommended grade)
•Oil filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the engine oil level and condition using the dipstick.
2
Inspect for external oil leaks around seals, gaskets, and oil pan.
3
Conduct a compression test on all cylinders to check for internal leaks.
4
Perform a cylinder leak-down test to identify potential valve or piston ring issues.
5
Use an OBD-II scanner to check for any related trouble codes.
6
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and allow the engine to cool down.
Disconnect the battery for safety.

2. Inspect and Replace PCV Valve

Tools Required: Pliers, socket set
Locate the PCV valve in the engine bay.
Remove the PCV valve by gently twisting and pulling it out.
Inspect the valve for clogs or damage; replace if necessary.
Reinstall the new PCV valve securely.

3. Replace Engine Oil and Filter

Tools Required: Oil filter wrench, drain pan, socket set
Place a drain pan under the oil pan and remove the drain plug; allow the old oil to completely drain.
Remove the old oil filter using the oil filter wrench.
Install the new oil filter and tighten it according to specifications (typically hand-tight).
Replace the drain plug and tighten it to the manufacturer’s torque specifications.
Fill the engine with the appropriate type and amount of oil (check owner's manual for specifications).

4. Conduct Compression and Leak-Down Tests

Tools Required: Compression tester, leak-down tester
Remove spark plugs and insert the compression tester into each cylinder, cranking the engine to get readings.
Record the compression values; they should be within manufacturer specifications.
Follow up with the leak-down test to further analyze the condition of the valves and piston rings.