my Honda Accord 9th Generation (2013-2017) has a jerking motion during acceleration

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

609 words

Problem Statement

Learn how to diagnose and fix jerking motion during acceleration in Honda Accord 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Relieve fuel system pressure before servicing the fuel system.

Symptoms

•Jerking or hesitation during acceleration
•Reduced engine power
•Check engine light illuminated
•Unusual noises from the engine or transmission
•Poor fuel economy
•Engine stalling at idle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect and check the condition of the spark plugs and ignition coils for wear or damage.
3
Examine the fuel system, including fuel pump pressure and fuel filter condition.
4
Check for vacuum leaks in the intake system and inspect the intake manifold.
5
Test the transmission fluid level and condition; look for signs of contamination or burning.
6
Perform a visual inspection of the throttle body and clean if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Spark plug socket
•Ratchet
•Torque wrench
•Throttle body cleaner
•Fuel line disconnect tool
•Screwdrivers
•Transmission fluid pump

Parts Required

•Spark plugs
•Ignition coils (if faulty)
•Fuel filter
•Transmission fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect and check the condition of the spark plugs and ignition coils for wear or damage.
3
Examine the fuel system, including fuel pump pressure and fuel filter condition.
4
Check for vacuum leaks in the intake system and inspect the intake manifold.
5
Test the transmission fluid level and condition; look for signs of contamination or burning.
6
Perform a visual inspection of the throttle body and clean if necessary.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to ensure safety while working on the electrical components.

2. Replace Spark Plugs and Ignition Coils (if faulty)

Tools Required: Spark plug socket, ratchet, torque wrench, dielectric grease.
Remove the ignition coil harness and unscrew the coils using the spark plug socket.
Replace any faulty ignition coils with new ones.
Install new spark plugs, ensuring they are gapped correctly according to specifications (usually around 0.044 inches for the Accord).
Torque the spark plugs to the manufacturer's specifications (typically 13 lb-ft).

3. Inspect and Clean the Throttle Body

Tools Required: Throttle body cleaner, soft cloth, screwdrivers.
Remove the intake duct to access the throttle body.
Spray throttle body cleaner on a cloth and clean around the throttle plate to remove carbon buildup.
Ensure the throttle plate moves freely and is not sticking.

4. Check and Replace Fuel Filter (if necessary)

Tools Required: Fuel line disconnect tool, wrenches.
Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
Disconnect the fuel lines using the fuel line disconnect tool, taking caution to catch any spilled fuel.
Replace the old fuel filter with a new one, ensuring the flow direction is correct.
Reconnect the fuel lines and reinsert the fuel pump fuse.

5. Inspect and Repair Transmission Fluid (if needed)

Tools Required: Transmission fluid pump, funnel.
Check the transmission fluid level with the dipstick and assess its condition (color and smell).
If low or burnt, drain and replace with the manufacturer-recommended transmission fluid.
Refill the transmission fluid to the correct level using the pump and funnel.