my Honda Accord 9th Generation (2013-2017) engine hesitates when I accelerate what’s causing it

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

518 words

Problem Statement

Learn how to diagnose and fix engine hesitation in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening the intake manifold or throttle body.

Symptoms

•Engine hesitation or stuttering when accelerating
•Reduced power during acceleration
•Possible check engine light illuminated
•Rough idle or inconsistent engine performance
•Decreased fuel efficiency

Diagnostic Steps

1
Scan the vehicle's onboard diagnostic system using an OBD-II scanner to check for any stored error codes.
2
Inspect the air intake system for any obstructions or leaks, including the air filter and intake hoses.
3
Check the fuel system pressure with a fuel pressure gauge to ensure it is within specifications.
4
Examine the spark plugs and ignition coils for wear or damage.
5
Inspect the throttle body for carbon buildup or obstruction.
6
Test the Mass Air Flow (MAF) sensor operation with a multimeter or scan tool.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fuel pressure gauge
•Throttle body cleaner
•MAF sensor cleaner

Parts Required

•Spark plugs
•MAF sensor (if replacement is necessary)
•Air filter (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostic system using an OBD-II scanner to check for any stored error codes.
2
Inspect the air intake system for any obstructions or leaks, including the air filter and intake hoses.
3
Check the fuel system pressure with a fuel pressure gauge to ensure it is within specifications.
4
Examine the spark plugs and ignition coils for wear or damage.
5
Inspect the throttle body for carbon buildup or obstruction.
6
Test the Mass Air Flow (MAF) sensor operation with a multimeter or scan tool.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the battery to avoid electrical shorts.

2. Inspect and Replace Spark Plugs

Remove the engine cover (if applicable) using a socket set.
Disconnect the ignition coils from the spark plugs.
Remove the spark plugs using a spark plug socket.
Inspect plugs for wear; replace them if they are worn or fouled.
Install new spark plugs, torquing to manufacturer specifications (typically 13-16 lb-ft).
Reconnect the ignition coils and replace the engine cover.

3. Clean Throttle Body

Locate the throttle body and disconnect the air intake hose.
Remove the throttle body from the intake manifold (usually requires socket set).
Use throttle body cleaner and a soft brush to clean the interior surfaces.
Reinstall the throttle body, ensuring to torque bolts to specification.
Reconnect the air intake hose.

4. Test and Replace MAF Sensor (if needed)

Disconnect the MAF sensor from its electrical connector.
Remove the sensor from the intake tube.
Inspect for dirt or damage; clean with MAF sensor cleaner if necessary.
If cleaning does not resolve issues, replace the MAF sensor with a new one.
Reconnect the sensor and clear any error codes.