how to reset the tire pressure monitoring system in Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

451 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) in Honda Accord 2013-2017. Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure tires are properly inflated before resetting the TPMS system.
•Handle TPMS sensors with care; they can be damaged if improperly removed or installed.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Warning message on the vehicle’s information display
•Tire pressure warning persists after adjusting tire pressures

Diagnostic Steps

1
Check the tire pressures of all four tires, including the spare tire, and adjust to the recommended PSI.
2
Start the vehicle and observe if the TPMS warning light remains illuminated.
3
Verify if the TPMS system is functioning by using a TPMS scanner to read the sensor data.
4
Ensure that the vehicle's battery is charged and the electrical systems are functioning properly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•TPMS scanner (optional)
•Tire pressure gauge

Parts Required

•Tire pressure monitoring sensors (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures of all four tires, including the spare tire, and adjust to the recommended PSI.
2
Start the vehicle and observe if the TPMS warning light remains illuminated.
3
Verify if the TPMS system is functioning by using a TPMS scanner to read the sensor data.
4
Ensure that the vehicle's battery is charged and the electrical systems are functioning properly.

Solution

1. Preparation

Gather necessary tools:
- TPMS scanner (optional)
- Tire pressure gauge
Ensure all tires are inflated to the manufacturer's recommended pressure.

2. Reset TPMS Using the Button

Turn the ignition to ON (do not start the engine).
Locate the TPMS reset button under the steering column.
Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release the button.
Start the engine and allow it to run for about 20 minutes to complete the reset process.

3. Reset TPMS Using the Vehicle's Display

Turn the ignition to ON (do not start the engine).
Navigate to the settings using the dashboard display.
Select "Vehicle Settings" from the menu.
Choose "TPMS Calibration" and select "Calibrate."
Confirm the calibration when prompted and wait for the system to reset.

4. Verify Tire Pressure

Check all tire pressures again to ensure they are set correctly.
Drive the vehicle for about 10 minutes to ensure the TPMS warning light goes off.