how to reset the radio on Honda Accord 9th Generation (2013-2017) after battery disconnection

Honda Accord Eleventh Generation (2023-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

398 words

Problem Statement

Learn how to reset the radio on Honda Accord 2013-2017 after battery disconnection. Step-by-step guide to restore radio functionality and settings.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off before working on the radio system.

Symptoms

•Radio displays 'Code' or 'Error' message
•Loss of all preset radio stations
•Radio functions disabled until a code is entered
•Clock reset to 12:00 or incorrect time
•No audio output from the radio

Diagnostic Steps

1
Check the owner's manual for the radio security code.
2
Ensure the battery is properly reconnected and functioning.
3
Confirm that the radio is receiving power and that the fuses are intact.
4
Verify if the radio is in 'Lock' mode by trying to power it on.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Owner's manual

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather the necessary security code (found in the owner's manual or from the dealership).
Make sure the vehicle is in a safe and stationary position.

2. Turn on the Radio

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Press the power button on the radio to turn it on.

3. Enter the Security Code

When prompted with "Code" or "Error", use the radio preset buttons to enter the 5-digit security code.
- For example, if the code is 12345, press:
  - Preset 1 for "1"
  - Preset 2 for "2"
  - Preset 3 for "3"
  - Preset 4 for "4"
  - Preset 5 for "5"
If entered correctly, the radio will unlock and resume normal operation.

4. Reset Radio Settings

Reprogram your radio presets and adjust settings as desired.
Set the correct time on the clock, if necessary, by using the clock adjustment buttons.