how to reset the maintenance light on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

386 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2017 Honda Accord. Step-by-step guide to ensure your vehicle is ready for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' before beginning the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Engine running normally
•No changes in vehicle performance
•Maintenance reminder message displayed

Diagnostic Steps

1
Ensure the vehicle is in 'Park' with the ignition turned off.
2
Press the start button without pressing the brake pedal to turn on the electrical systems.
3
Navigate to the 'Settings' menu on the dashboard display using the controls on the steering wheel.
4
Select 'Maintenance' from the settings menu.
5
Choose the specific maintenance item that corresponds to the reset you wish to perform.
6
Confirm the reset when prompted on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in 'Park' with the ignition turned off.
2
Press the start button without pressing the brake pedal to turn on the electrical systems.
3
Navigate to the 'Settings' menu on the dashboard display using the controls on the steering wheel.
4
Select 'Maintenance' from the settings menu.
5
Choose the specific maintenance item that corresponds to the reset you wish to perform.
6
Confirm the reset when prompted on the display.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Turn On Ignition

Press the "Start" button without pressing the brake pedal to activate the electrical system (or turn the key to the "On" position).

Use the steering wheel controls to scroll through the dashboard display.
Locate and select the "Settings" option.

4. Select Maintenance

In the settings menu, find and select the "Maintenance" option.
Choose the appropriate maintenance item to reset (typically oil change or similar service).

5. Confirm Reset

When prompted, confirm the reset by selecting "Yes" or "Reset" depending on the option displayed.

6. Turn Off Ignition

Once the reset is confirmed, turn off the vehicle's ignition.