how to reset the maintenance light on my Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

422 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Dashboard displays 'Maintenance Due' message
•Engine oil change reminder is active

Diagnostic Steps

1
Ensure the car is in a safe location: Park the vehicle on a level surface and ensure the engine is off.
2
Turn on the ignition: Insert the key and turn it to the 'On' position without starting the engine.
3
Access the trip meter: Press the trip button on the dashboard until the trip A display appears.
4
Turn off the ignition: Turn the key back to the 'Off' position.
5
Press and hold the trip button: While holding the trip button, turn the ignition back to the 'On' position without starting the engine.
6
Release the trip button: After about 10 seconds, the maintenance light should flash and then go off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the car is in a safe location: Park the vehicle on a level surface and ensure the engine is off.
2
Turn on the ignition: Insert the key and turn it to the 'On' position without starting the engine.
3
Access the trip meter: Press the trip button on the dashboard until the trip A display appears.
4
Turn off the ignition: Turn the key back to the 'Off' position.
5
Press and hold the trip button: While holding the trip button, turn the ignition back to the 'On' position without starting the engine.
6
Release the trip button: After about 10 seconds, the maintenance light should flash and then go off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle key ready.

2. Turn on Ignition

Insert the key into the ignition and turn it to the "On" position, but do not start the engine.

3. Access the Trip Meter

Locate the trip button on the dashboard and press it until the display shows “Trip A”.

4. Turn Off Ignition

Turn the key back to the "Off" position completely.

5. Reset the Maintenance Light

While holding the trip button, turn the ignition back to the "On" position without starting the engine.
Continue to hold the trip button for approximately 10 seconds.
Watch for the maintenance light to flash and then turn off.

6. Confirm Reset

Release the trip button and turn off the ignition again to finalize the reset process.