how to reset the maintenance light on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

358 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2017 Honda Accord. Step-by-step guide to ensure your dashboard is clear after maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged while performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed in the instrument cluster
•Service indicator not turning off after maintenance is completed

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Navigate to the 'Settings' menu on the dashboard display.
3
Select 'Maintenance' or 'Oil Life' depending on the model.
4
Confirm the current oil life percentage is displayed.
5
Prepare to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface.

2. Accessing the Maintenance Reset

Turn the ignition switch to the "On" position (engine off).
Use the select/reset button on the instrument panel or steering wheel to navigate to the "Oil Life" or "Maintenance" menu.
Once "Oil Life" is displayed, press and hold the select/reset button until the oil life percentage starts to blink.

3. Resetting the Maintenance Light

While the oil life percentage is blinking, release the select/reset button.
Press and hold the select/reset button again until the display shows "Reset" or the oil life resets to 100%.
Confirm the reset by releasing the button.

4. Final Check

Turn off the ignition.
Turn the ignition back to the "On" position and check that the maintenance light is no longer illuminated.