how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

367 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface while performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues or other warning lights present
•Scheduled maintenance reminder may appear on the display

Diagnostic Steps

1
Confirm that the maintenance light is indeed the scheduled maintenance reminder.
2
Verify that all required maintenance services have been performed (oil change, filter replacement, etc.).
3
Ensure the vehicle is in the 'Run' position without starting the engine.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the ignition turned off.

2. Turn on the Ignition

Insert the key into the ignition (or have the key fob inside the vehicle for push-start models).
Turn the ignition to the "Run" position (do not start the engine).

Press the "Menu" button on the dashboard display.
Use the arrow buttons on the steering wheel to scroll to "Settings" or "Vehicle Information."
Select "Maintenance" or "Maintenance Reset" from the menu.

4. Reset the Maintenance Light

Once in the maintenance menu, look for the option that says "Oil Life" or "Reset."
Press and hold the "Enter" button or "Select" button until the oil life resets to 100%.
Confirm the reset if prompted.

5. Turn Off the Ignition

Turn the ignition off completely after the reset is confirmed.
Remove the key from the ignition (if applicable).