FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)? - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)?

how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
386 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) after maintenance. Step-by-step guide for quick reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' before starting this procedure.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •No other engine warning lights are present
  • •Vehicle has recently undergone maintenance
  • •Driver may receive reminders for service intervals

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools: none required for this procedure.
2. Resetting the Maintenance Light
  1. Turn Off the Ignition: Ensure the ignition is completely turned off.
  2. Press and Hold the Button: Locate the "Select/Reset" button on the dashboard and press and hold it.
  3. Turn On Ignition: Without starting the engine, turn the ignition key to the "ON" position.
  4. Hold the Button: Continue holding the "Select/Reset" button until the maintenance light turns off (approximately 10 seconds).
  5. Release the Button: Let go of the "Select/Reset" button once the light resets.
  6. Turn Off Ignition Again: Turn the ignition key back to the "OFF" position.
  7. Verify Reset: Start the engine to confirm the maintenance light has been reset and is no longer illuminated.