how to reset the check engine light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

428 words

Problem Statement

Learn how to reset the check engine light on Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is off and cool before working on electrical components.

Symptoms

•Check engine light illuminated
•Potential diagnostic trouble codes (DTCs) logged in the vehicle's computer
•Engine performance issues prior to the reset
•Engine running normally post-repair

Diagnostic Steps

1
Use an OBD-II scanner to read and document any error codes.
2
Clear the error codes using the scanner.
3
Disconnect the negative battery terminal for 10 minutes (optional).
4
Reconnect the battery terminal (if disconnected).
5
Start the engine and check if the check engine light reappears.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Safety gloves

Parts Required

•None (unless parts were previously replaced)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, safety gloves
Ensure the vehicle is parked on a level surface with the engine off.

2. Use OBD-II Scanner

Locate the OBD-II port beneath the dashboard on the driver's side.
Plug the OBD-II scanner into the port.
Turn the ignition to the "ON" position without starting the engine.
Follow the scanner’s prompts to read the diagnostic trouble codes.

3. Clear the Codes

Select the option to clear or erase codes from the OBD-II scanner.
Confirm the action and wait for the process to complete.
Disconnect the scanner from the OBD-II port.

4. Optional Battery Disconnect Method

Open the hood and locate the negative (-) battery terminal.
Use a socket wrench to loosen the negative terminal clamp and remove it.
Wait for at least 10 minutes to ensure all residual power is drained.
Reattach the negative terminal and tighten the clamp securely.

5. Start the Engine

Turn the ignition key to the "ON" position.
Start the engine.
Observe the dashboard to ensure the check engine light does not illuminate again.