how to reset maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

369 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord 9th Generation. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park mode before resetting the maintenance light.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or other scheduled maintenance displayed
•No other vehicle performance issues present

Diagnostic Steps

1
Ensure the vehicle is turned off and in park mode.
2
Press the power button to turn on the ignition without starting the engine (accessory mode).
3
Locate the 'Trip' button on the dashboard.
4
Press and hold the 'Trip' button until the trip odometer resets to zero.
5
Turn the ignition off and then back on to verify that the maintenance light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools are required for this procedure.

Parts Required

•No parts are needed for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in park mode.
2
Press the power button to turn on the ignition without starting the engine (accessory mode).
3
Locate the 'Trip' button on the dashboard.
4
Press and hold the 'Trip' button until the trip odometer resets to zero.
5
Turn the ignition off and then back on to verify that the maintenance light has been reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools (if any) such as a paper clip or similar item to press the buttons.

2. Ignition On

Sit in the driver’s seat and close all doors.
Press the power button to turn on the ignition without starting the engine.

3. Reset Maintenance Light

Locate the "Trip" button on the dashboard, which is typically near the speedometer.
Press and hold the "Trip" button for approximately 10 seconds until the trip odometer resets to zero.
Release the "Trip" button.

4. Turn Ignition Off and On

Turn off the ignition completely.
Turn the ignition back on (do not start the engine) to check if the maintenance light is no longer illuminated.