how to reset maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide for a quick and easy reset after maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location with the parking brake engaged while performing this reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle has undergone recent oil change or service

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Press the trip/reset button until the trip meter is displayed.
4
Turn off the ignition.
5
While holding the trip/reset button, turn the ignition back to the 'ON' position.
6
Continue holding the button until the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required (manual process)

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip/reset button on the dashboard.
3
Press the trip/reset button until the trip meter is displayed.
4
Turn off the ignition.
5
While holding the trip/reset button, turn the ignition back to the 'ON' position.
6
Continue holding the button until the maintenance light resets.

Solution

1. Preparation

Ensure all scheduled maintenance is completed before resetting the maintenance light.
Gather necessary items: the vehicle key and a clean interior to access the dashboard easily.

2. Access Trip Meter

Make sure the vehicle is in the "ON" position (do not start the engine).
Locate the trip/reset button on the instrument panel, usually found near the speedometer.

3. Reset the Maintenance Light

Press and hold the trip/reset button until the trip meter is displayed.
Turn off the ignition completely.
While keeping the trip/reset button pressed, turn the ignition back to the "ON" position (do not start the engine).
Continue to hold the trip/reset button until the maintenance light flashes and then turns off.
Release the button after the light has been reset.

4. Confirm Reset

Turn off the ignition again and then start the vehicle to ensure the maintenance light is no longer illuminated.