how to reset maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

396 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and turned off before starting the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are on
•Maintenance reminder message appears on the display
•Vehicle operates normally otherwise

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' or 'RUN' position without starting the engine.
2
Check the odometer reading and ensure it is displayed on the dashboard.
3
Access the vehicle settings using the controls on the steering wheel.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or remote

Parts Required

•None required for reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked with the engine off and in a safe location.
Have the vehicle key or remote ready for the process.

2. Turn on the Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the ignition to the "ON" position, but do not start the engine.

Locate the "Menu" button on the steering wheel controls.
Press the "Menu" button to access the vehicle settings.
Use the directional arrows to navigate to the "Vehicle Settings" option.

4. Reset Maintenance Light

Scroll to "Maintenance" using the directional arrows and select it by pressing the "Enter" button.
Choose "Oil Life" or "Maintenance Reset" option.
Follow the prompts to reset the oil life indicator to 100% or confirm the reset.

5. Turn Off the Ignition

Once the maintenance light has been reset, turn off the ignition.
Remove the key from the ignition, if applicable.