how to replace the brake pads on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

578 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Step-by-step guide on how to replace brake pads on a 2013-2017 Honda Accord. Learn symptoms, diagnostic steps, tools, and safety tips.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before working on brakes to avoid burns.

Symptoms

•Squeaking or squealing noise when brakes are applied
•Vibration when braking
•Longer stopping distances
•Warning light on the dashboard for brake system
•Brake pedal feels soft or spongy

Diagnostic Steps

1
Inspect the brake pads visually for wear indicators.
2
Measure the thickness of the brake pads with a caliper.
3
Check the condition of the brake rotors for grooves or warping.
4
Test the brake fluid level in the reservoir.
5
Check for any brake fluid leaks around calipers and lines.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•C-clamp or brake caliper tool
•Brake grease
•Torque wrench

Parts Required

•New brake pads
•Brake fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all tools and parts needed for the brake pad replacement.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety gloves and goggles for protection.

2. Raise the Vehicle

Use a jack to lift the front or rear of the vehicle, depending on which brake pads need replacing.
Secure the vehicle with jack stands for safety.

3. Remove Wheel

Use a lug wrench to loosen and remove the lug nuts.
Take off the wheel to access the brake assembly.

4. Remove Brake Caliper

Use a socket set to remove the caliper mounting bolts.
Carefully lift the caliper off the rotor without straining the brake line; suspend it with a bungee cord or rope to avoid hanging from the line.

5. Replace Brake Pads

Slide the old brake pads out of the caliper bracket.
Compare new pads to old pads to ensure correct size.
Apply brake grease to the back of the new pads to prevent squeaking.
Install the new brake pads into the caliper bracket.

6. Reinstall Brake Caliper

Compress the caliper piston using a C-clamp or brake caliper tool to accommodate the new pads.
Reposition the caliper over the new pads and secure it by tightening the caliper mounting bolts to the manufacturer’s torque specifications (typically around 20-30 ft-lbs).

7. Reinstall Wheel

Place the wheel back onto the hub and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and use a torque wrench to tighten the lug nuts to the manufacturer’s specifications (usually around 80-100 ft-lbs).

8. Test the Brakes

Before driving, pump the brake pedal a few times to ensure the pads seat properly.
Check the brake fluid level and add fluid if necessary.